SWMM5 - Stormwater Management Model
SWMM 5, Watersheds, Water Quality,Hydrology, Hydraulics - Watersheds
results table export
- Rating: No Rating
Is there a way of quickly exporting a timeseries of results from all nodes in a project? Using the report > table option requires the user to select each node one at a time, for instance, with a maximum of 6 nodes per table. I have over 150 nodes so am looking for a quicker way to select and export all ???
Replies to This Discussion
-
Permalink Reply by Steven Pells on -
wow, thanks for all your responses that was really helpful!
-
Permalink Reply by Robert E Dickinson on -
If you use the SWMM 5 DOS Engine and the REPORT function with NODES ALL then you will get a text output file with all of the node data. You can see an example at the bottom of this page.
[REPORT]
CONTROLS NO
NODES ALL
LINKS ALL
Latest Activity
Hi,
Thanks a lot and I will be working on it.
Thanks again for your effort.
Upaka
Here is a sample SWMM 5 model for you to look at - it has one TSS pollutant and one loading point - the node 8040
Yes, you can add a Dry weather flow concentration to a node in SWMM 5. 1st you make a pollutant, then go to a node and add DWF and a pollutant concentration. The load - flow * concentration will go into the network.
Hi,Is it possible to add a pollutant concentration (eg. TSS = 20 mg/L) to a node at a network in SWMM?
Thanks a lot
Saving U.S. Water and Sewer Systems Would Be Costly
By CHARLES DUHIGG
WASHINGTON — One recent morning, George S. Hawkins, a long-haired environmentalist who now leads one of the largest and most prominent water and sewer systems, trudged to a street…
If you a lead and lag pump connecting the same upstream and downstream
QA/QC SWMM 5 Version for SWMM 5.0.013 and SMWM 5.0.018
March 2, 2010 Version
swmm5.dll
Epaswmm5.exe
© 2010 Created by Robert E Dickinson
Badges | Report An Issue | SWMM 5 Blog | Privacy | Terms of Service
