SWMM 5, Watersheds, Water Quality,Hydrology, Hydraulics - Watersheds

Calibration Files

Rating: No Rating

I have loaded monitoring data into the calibration file in an attempt to use this tool (instead of exporting to excel) but I can't seem to find where the graphing option is. I know where the graphing tools are for model data but not for the calibration data.

Help for SWMM just tells me how to load it...
Thoughts?

▶ Reply to This

Replies to This Discussion

Permalink Reply by Robert E Dickinson on August 18, 2008 at 10:17am: The calibration file is automatically used in SWMM 5 as long as you have a calibration file name entered using the command Project=>Calibration Data and use just one view variable:; ▶ Reply to This

Permalink Reply by Kenneth L. Orie on August 18, 2008 at 10:30am: I am familiar with this screen, but how do you display the calibration file along with the model results...; ▶ Reply to This

Permalink Reply by Robert E Dickinson on August 18, 2008 at 10:33am: Ken, this is done automatically in SWMM 5. If you have a depth calibration file and plot the simulated results you should see a graph at for both the monitored and simulated depths. See this plot for example:; ▶ Reply to This

RSS

Welcome to
SWMM5 - Stormwater Management Model

Sign Up
or Sign In

Latest Activity

Rakesh is now a member of SWMM5 - Stormwater Management Model

Welcome Them!

6 hours ago

Cygne is now a member of SWMM5 - Stormwater Management Model

Welcome Them!

on Thursday

Robert E Dickinson added 2 blog posts

on Wednesday

Upaka replied to Upaka's discussion 'Pollutant to a node'

Hi, Thanks a lot and I will be working on it. Thanks again for your effort. Upaka

on Tuesday

Robert E Dickinson replied to Upaka's discussion 'Pollutant to a node'

Yes, you can add a Dry weather flow concentration to a node in SWMM 5. 1st you make a pollutant, then go to a node and add DWF and a pollutant concentration. The load - flow * concentration will go into the network.

March 16

Upaka added a discussion

Pollutant to a node

Hi,Is it possible to add a pollutant concentration (eg. TSS = 20 mg/L) to a node at a network in SWMM? Thanks a lot

March 16

Upaka is now a member of SWMM5 - Stormwater Management Model

Welcome Them!

March 16

Robert E Dickinson added a blog post

Saving U.S. Water and Sewer Systems Would Be Costly

Saving U.S. Water and Sewer Systems Would Be Costly By CHARLES DUHIGG WASHINGTON — One recent morning, George S. Hawkins, a long-haired environmentalist who now leads one of the largest and most prominent water and sewer systems, trudged to a street…

March 15

Robert E Dickinson added 2 notes

March 14

Robert E Dickinson added a blog post

Lead and Lag Pump Options in SWMM 5

If you a lead and lag pump connecting the same upstream and downstream

March 13